Half the garage had been filled with pretty much nothing but boxes of my stuff for a month. Over the past day I made a few trips to Home Depot (you can only shove so much lumber into an Accord) and built a triple-deck storage shelf/work table which sits against the wall. The floor is alot neater, though it’s nowhere near clean yet.
Some more searching through my pile of rubble revealed a 12mm Axle Spacer of Convenience. Drilled it to 10mm, and slammed it along with the pulley onto the motor shaft. Most of the drive mechanics are now complete. So theoretically, I can run a wheelspin test, except it probably won’t go too far – I don’t have batteries, a suitable controller, or anything else yet. Latest pics…