Anyways, here’s the pretty picture of the robot that I promised. What better backdrop for angry \\m\/echanical \\m\/ayhem is there than a flower garden?<\/p>\n
I brought with me some assorted lighting products to comply with the power indicator requirement. So, some blue LEDs and resistors later, the bot had a “body glow”.<\/p>\n The emission of the LEDs is captured well by the camera. It’s actually much bluer in person.<\/p>\n After a last overview to add threadlocker on screws that were finger-tight for testing, I threw the robot and associated equipment back into the crate and hauled off to the event.<\/p>\n I ended up not bringing any insect bots this year, so there’s no bot report on the Sunday ants and beetles tournament, but I did take some pictures.<\/p>\n Anyways…<\/p>\n Welcome to Dragon*Con<\/a>.<\/p>\n The most eclectic collection of comic book heroes, SciFi characters, anime schoolgirls,\u00a0 ambiguously-gendered deviants in locally popular indie bands, and much much more, in the universe. This guy worked two years on a painstakingly accurate interpretation of… a character I have not heard of in a show I have not watched.<\/p>\n In the middle of all this, somehow, is robots<\/em>. I am satisfied.<\/p>\n Here’s the “Microbattles” event on Sunday, which features full enclosed-arena combat with 1lb and 3lb bots.<\/p>\n Returning again is the super legit Atlanta Antweight Arena\u2122, a 6 x 6 foot, quarter-inch polycarbonate-sheathed Box of Awesome.<\/p>\n After the last arena hazard exploded off in a violent expulsion of wheel chunks, plastic shavings, and angle grinder gears, it was determined by the community at large that robots should be less amenable to destruction via the hazard, and that the hazard should be designed more for… well, fucking around with the match.<\/p>\n So the new arena hazard is a solenoid-driven flipping ramp that is weight-sensitive. On average, when it is functional (i.e. the latch isn’t jammed), it will pitch a 1 pound robot a few inches up and two or three feet over.<\/p>\n My suggestion of a powered turntable was turned down.<\/p>\n Robots at the event ranged from the compact, durable, and elegant, to…<\/p>\n Yeah, about them robots.<\/p>\n Here’s a picture of robots (Segs and Pwnsauce). Fighting. Like on Battlebots.<\/p>\n The main event is a highlight during the Monday of the con, which is when things are always ending or wrapping up. It’s an open stage sumo-type event where big spinny things are not allowed due to the peculiar fact that the arena wall is the audience.<\/p>\n No, not really. But they still don’t allow spinners, flails and chains, or other surfaces that could conceivably travel at more than 20 feet per second, the prescribed speed limit.<\/p>\n The combat stage in question. Always the shittiest, most beaten up, and uneven stage risers that the hotel has, and usually recycled from the previous year (and beyond!), then littered with audience-sourced stage hazards to make life more interesting.<\/p>\n This year, we have objects as diverse as to run the gamut from shoes to donut boxes.<\/p>\n So about that whole robot fightin’ thing…<\/p>\n Bots at D*C tend to be less SRS BIZNESS,\u00a0 if the brightly painted lawn mower shell with a popcorn toy on top doesn’t tell you already, than the more professional league events due to the fact that there’s nothing really to win<\/em> besides glory and a plaque…. and the hearts of nearly a thousand audience members at any one time. The event average 80% seats full and approached standing room only at the end. Coming from a harder combat background, I’m slightly jaded, but the average Stormtrooper finds this very amusing.<\/p>\n Usually, big steel bars are bolted into the stage riser surface to perform one of several functions. They act as more floor hazards to discourage plain box and wedge designs which, while effective, are boring as hell.<\/p>\n They also, as was discovered at this event, keep the risers together<\/em>. A few good shoves from flying 30 pounds robots and inches-wide seams would open up in the floor because the risers would physically move from the impract.<\/p>\n Floor-scraping wedges have a hard time navigating to begin with, but fast ones begin tearing up the stage surface. A few seams and edges had to be cut off, hammered, or re-screwed as the event progressed.<\/p>\n Here’s a cool shot of \u00dcberclocker performing clampbot gymnastics.<\/p>\n Okay, so that’s totally and utterly staged, but for good reason. I actually played most of the tournament with either one function drive side (the left one) or none at all.<\/p>\n Why? Because my sketchy-ass $2.50 surplus drive motors let out the smoke like nothing else I have ever seen.<\/p>\n I actually lost one of them before matches even started. During some test driving on the stage, the right side motor ceased functioning. By that, I mean if you try to power it, huge sparks shoot out from the brush end. Not smooth for robot work.<\/p>\n Knowing the bot wasn’t going to win at that point, I sort of just tossed it in the tournament for grins and chuckles\u2122. This involved starting in increasingly absurd positions as the matches went on – it was a round robin tournament, so I had plenty of time for showmanship.<\/p>\n The reason for the failure is still unknown, but there was no way the bot would move at all with one motor dragging on the right side. So I took it out – leaving only the gearbox to add a very minimal amount of drag, so the robot would tend to curve in a wide right cirle.<\/p>\n The last minute hack that saved me to some degree was turning \u00dcberclocker into an elaborate cheap R\/C car. You know, those things which go forward, but then turn in one direction when they reverse.<\/p>\n![\"\"](\"\/pics\/cb2\/cb2_129.jpg\")
<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n<\/a><\/p>\n